Ecler MAC.70v

Independent input sensibility control for each channel with ±20 dB adjustment range, GAIN
Independent 3 band tone controls for each channel with –20dB to +10 dB adjustment range on channels 1 to 3 +AUX and from CUT to +10 on all other channels of both models.
Pre-Listening function with headphones volume control and monitoring possibility through the CUE output (with dedicated volume control) and an external amplifier.
Assignable Talkover function with efficiency and recovery time controls.
Phantom power supply for condenser microphones, general ON/OFF switch on front panel and individual internal settings.

Dual VU-Meter
The left VU-Meter displays the prefader level of the channels which have the PFL switch activated or the main mix level when none of the PFL switches is activated.
The right VU-Meter displays the signal level of the output selected in the section below it. If none of these switches is activated, the main mix level will be displayed.
Independent Balance for each channel and L+R switch for summing both stereo signals.

Inputs: 3 PHONO, 4 HIGH LINE (high level line for compact discs, DAT, MP3 players), 3 LOW LINE, AUX IN and MIX; plus 2 inputs ready for balanced microphones (XLR3).
Outputs: 2 OUT Outputs with independent volume control (OUT 1 balanced), two REC outputs and one CUE output.
Assignable ECLER PRO Crossfader: Modular, removable fader with VCA circuit. Channels 1, 3 and 5 can be assigned via the XFA switch to the A side of the crossfader. An analogue XFB switch at the even channels 2, 4 and 6 assign these signals to side B of the crossfader. In any case, when these switches are not activated, the signals are directly assigned to the main MIX bus.

Assignable Talkover with efficiency and recovery time controls.
Double VU meter. The left VU meters displays the channel level with the PFL switch (pre-fader listening enabled) or the main mix, MIX, when no PFL is enabled. The right VU meter displays the existing level at the selected outputs or at the main mix, MIX, when none of the switches under the VU meter is enabled.
Independent balance control for each output and mono/stereo switch, L+R.